FitMyRC

Compatible Batteries

1 dimension matches based on tray size, connector compatibility, and voltage limits.

Showing 0–0 of 0 batteries

Warning Filters

Warning-state batteries are hidden by default. Enable the cases you still want to review.


CNHL 450mAh for AX24

CNHL

CNHL Racing Series 450mAh 4S 75C LiPo

Fits (with Expansion Kit)

Capacity

450mAh

Voltage

4S

C-Rating

75C

Connector

JST

Case Type

Soft case

Dimensions

30x18x65mm

Warning: Voltage mismatch Adapter needed: JST to JST-PH 2.0 Spacer required Fits with Expansion Kit
More details +

Battery Cell Type

LiPo

Wire Exit

Side

Series

MiniStar Series

Weight

62g

Source

CNHL

Notes

The CNHL MiniStar 450mAh 4S 70C-75C LiPo battery is a lightweight, high-performance battery designed for 2-3 inch micro FPV drones and toothpicks.

View Battery View on Amazon

Verify connector and wire exit in photos.

Fitment Notes

Space is tight on this chassis. We recommend shorty packs when possible.

Wire routing is tight on this model. Verify top-exit or flexible leads before buying.

Chassis Details

Platform: Rock Crawler

Notes: The Axial AX24 XC-1 is a 1/24 scale, 4-wheel steering (4WS) Ready-to-Run micro RC crawler designed for exceptional indoor and outdoor performance.

Battery Brands That Fit

CNHL (1)

Understanding fitment results

Fitment methodology ↓

We compare tray dimensions against verified battery dimensions, applying a 2mm tolerance for cable management and straps.

Label Definitions

  • Spacer Required: The battery is notably shorter than the tray. A foam spacer or block helps prevent sliding.
  • Voltage mismatch: The battery’s max charged voltage exceeds the car’s rated limit. Running it risks ESC or motor damage.
  • Hard case required: Some tracks require hard cases for safety and compliance. Soft packs may fail tech inspection.
  • Low voltage alarm recommended: The car isn’t LiPo-ready, so add an LVC alarm to avoid over-discharge.
  • Adapter needed: The connector type differs. Use a quality adapter rated for the current draw.

We group compatible connectors (for example IC5/EC5 and Deans/T-Plug) to reduce false mismatches.

“Fits with mod” appears when only height fails and an expansion kit is available.

Wire-exit clearance varies by chassis. Always confirm lead orientation in photos.

Related Cars

Axial SCX10 III Jeep Gladiator chassis

Axial

SCX10 III Jeep Gladiator

Tray Length 565mm
Voltage 3SV Max
Plug IC3
View Car View Fit

See Also

Open the car page

Review chassis notes, specs, and selected compatible packs.

Browse more cars

Jump to similar chassis, trims, and other tray sizes.

Open setup guides

Read the measurement, safety, and connector primers before buying.

Measure your tray again

Useful if you suspect your trim or battery straps differ from the catalog.

Helpful Next Steps

Browse All Cars

Open another relevant FitMyRC resource for this chassis.

Connector Guide

Open another relevant FitMyRC resource for this chassis.

2S vs 3S Guide

Open another relevant FitMyRC resource for this chassis.

Battery Tray Guide

Open another relevant FitMyRC resource for this chassis.