FitMyRC

Compatible Batteries for Axial Ryft

3 filtered battery options based on tray size, connector compatibility, and voltage limits.

Showing 0–0 of 0 batteries

Warning Filters

3 batteries currently included.


Gens Ace 6000mAh for Ryft

Gens Ace

Gens Ace Redline 6000mAh 2S 130C LiPo

Capacity

6000mAh

Voltage

2S

C-Rating

130C

Connector

XT90

Case Type

Hard case

Dimensions

96x46x25mm

Adapter needed: XT90 to IC5
More details +

Battery Cell Type

LiPo

Wire Exit

Top

Series

Redline Series

Weight

175g

Source

Gen Ace

Notes

The Gens Ace Redline 6000mAh 2S 130C LiPo battery is a high-performance 7. 6V HV hardcase pack designed for 1/10 and 1/8 scale RC racing.

Verify connector and wire exit in photos.

View Battery Check on Amazon

Ovonic 4600mAh for Ryft

Ovonic

Ovonic 4600mAh 2S 50C Shorty LiPo

Capacity

4600mAh

Voltage

2S

C-Rating

50C

Connector

Deans

Case Type

Hard case

Dimensions

95x46x25mm

Adapter needed: Deans to IC5
More details +

Battery Cell Type

LiPo

Wire Exit

Top

Series

Shorty

Weight

210g

Source

Manufacturer specs

Notes

Shorty pack for buggies/drift

Verify connector and wire exit in photos.

View Battery Check on Amazon

Gens Ace 450mAh for Ryft

Gens Ace

Gens Ace 450mAh 2S 50C LiPo Battery

Capacity

450mAh

Voltage

2S

C-Rating

50C

Connector

JST

Case Type

Soft case

Dimensions

56x31x11mm

Warning: Hard case required Adapter needed: JST to IC5 Spacer required
More details +

Battery Cell Type

LiPo

Wire Exit

Side

Series

Standard Series

Weight

33g

Source

Gen Ace

Notes

The Gens Ace 450mAh 2S 50C LiPo battery (7. 4V) is a lightweight power source designed for small RC models like the Emax Babyhawk and 250-sized helicopters.

Verify connector and wire exit in photos.

View Battery Check on Amazon

Chassis Details

Platform: Rock Bouncer Buggy

Notes: The Axial RBX10 Ryft is a 1/10 scale 4WD Ready-to-Run brushless rock bouncer designed for high-speed off-road action on various terrains.

Understanding fitment results

We compare tray dimensions against verified battery dimensions, applying a 2mm tolerance for cable management and straps.

Spacer Required: The battery is notably shorter than the tray, so a foam block helps prevent movement.

Voltage mismatch: The battery’s max charged voltage exceeds the car’s rated limit.

Hard case required: Some tracks require hard-case packs for safety and compliance.

Low voltage alarm recommended: The chassis may not be LiPo-ready, so extra protection is recommended.

Adapter needed: The connector type differs, so a rated adapter or re-solder is required.

We group compatible connectors, surface “fits with mod” only when an expansion-height path exists, and still recommend verifying wire exit clearance in photos.

Fitment Notes

Space is tight on this chassis. We recommend shorty packs when possible.

Wire routing is tight on this model. Verify top-exit or flexible leads before buying.

Many tracks require hard-case packs for this chassis. Choose hard case to avoid tech inspection issues.

Hard Case Options

Hard-case packs are recommended for track compliance and chassis protection. Use the warning filters above to include hard-case exceptions only when you need them.

Related Cars

See Also

Open the car page

Review chassis notes, specs, and selected compatible packs.

Browse more cars

Jump to similar chassis, trims, and other tray sizes.

Open setup guides

Read the measurement, safety, and connector primers before buying.

Measure your tray again

Useful if you suspect your trim or battery straps differ from the catalog.

Helpful Next Steps

Browse All Cars

Open another relevant FitMyRC resource for this chassis.

Connector Guide

Open another relevant FitMyRC resource for this chassis.

2S vs 3S Guide

Open another relevant FitMyRC resource for this chassis.

Battery Tray Guide

Open another relevant FitMyRC resource for this chassis.