FitMyRC

Compatible Batteries

1 dimension matches based on tray size, connector compatibility, and voltage limits.

Showing 0–0 of 0 batteries

Warning Filters

Warning-state batteries are hidden by default. Enable the cases you still want to review.


Gens Ace 450mAh for 22X-4 Elite 4WD Buggy

Gens Ace

Gens Ace 450mAh 2S 50C LiPo Battery

Capacity

450mAh

Voltage

2S

C-Rating

50C

Connector

JST

Case Type

Soft case

Dimensions

56x31x11mm

Warning: Hard case required Adapter needed: JST to XT60 Spacer required
More details +

Battery Cell Type

LiPo

Wire Exit

Side

Series

Standard Series

Weight

33g

Source

Gen Ace

Notes

The Gens Ace 450mAh 2S 50C LiPo battery (7. 4V) is a lightweight power source designed for small RC models like the Emax Babyhawk and 250-sized helicopters.

View Battery View on Amazon

Verify connector and wire exit in photos.

Fitment Notes

Space is tight on this chassis. We recommend shorty packs when possible.

Many tracks require hard-case packs for this chassis. Choose hard case to avoid tech inspection issues.

Hard Case Options

Hard-case packs are recommended for track compliance and chassis protection. Use the warning filters above to include hard-case exceptions only when you need them.

Chassis Details

Platform: Race car

Notes: The Team Losi Racing 22X-4 Elite Race Kit builds on the success of the award-winning 22X-4, equipping racers with advanced features for exceptional performance.

Battery Brands That Fit

Gens Ace (1)

Understanding fitment results

Fitment methodology ↓

We compare tray dimensions against verified battery dimensions, applying a 2mm tolerance for cable management and straps.

Label Definitions

  • Spacer Required: The battery is notably shorter than the tray. A foam spacer or block helps prevent sliding.
  • Voltage mismatch: The battery’s max charged voltage exceeds the car’s rated limit. Running it risks ESC or motor damage.
  • Hard case required: Some tracks require hard cases for safety and compliance. Soft packs may fail tech inspection.
  • Low voltage alarm recommended: The car isn’t LiPo-ready, so add an LVC alarm to avoid over-discharge.
  • Adapter needed: The connector type differs. Use a quality adapter rated for the current draw.

We group compatible connectors (for example IC5/EC5 and Deans/T-Plug) to reduce false mismatches.

“Fits with mod” appears when only height fails and an expansion kit is available.

Wire-exit clearance varies by chassis. Always confirm lead orientation in photos.

Related Cars

TLR 8IGHT-XE 2.0 Buggy Kit chassis

TLR

8IGHT-XE 2.0 Buggy Kit

Tray Length 140mm
Voltage 4SV Max
Plug IC5/EC5
View Car View Fit

See Also

Open the car page

Review chassis notes, specs, and selected compatible packs.

Browse more cars

Jump to similar chassis, trims, and other tray sizes.

Open setup guides

Read the measurement, safety, and connector primers before buying.

Measure your tray again

Useful if you suspect your trim or battery straps differ from the catalog.

Helpful Next Steps

Browse All Cars

Open another relevant FitMyRC resource for this chassis.

Connector Guide

Open another relevant FitMyRC resource for this chassis.

2S vs 3S Guide

Open another relevant FitMyRC resource for this chassis.

Battery Tray Guide

Open another relevant FitMyRC resource for this chassis.