4 filtered battery options based on tray size, connector compatibility, and voltage limits.
Showing 0–0 of 0 batteries
Warning Filters
4 batteries currently included.
Ovonic
Capacity
4600mAh
Voltage
2S
C-Rating
50C
Connector
Deans
Case Type
Hard case
Dimensions
95x46x25mm
Battery Cell Type
LiPo
Wire Exit
Top
Series
Shorty
Weight
210g
Source
Manufacturer specs
Notes
Shorty pack for buggies/drift
Verify connector and wire exit in photos.
Gens Ace
Capacity
6000mAh
Voltage
2S
C-Rating
130C
Connector
XT90
Case Type
Hard case
Dimensions
96x46x25mm
Battery Cell Type
LiPo
Wire Exit
Top
Series
Redline Series
Weight
175g
Source
Gen Ace
Notes
The Gens Ace Redline 6000mAh 2S 130C LiPo battery is a high-performance 7. 6V HV hardcase pack designed for 1/10 and 1/8 scale RC racing.
Verify connector and wire exit in photos.
Ovonic
Capacity
5200mAh
Voltage
2S
C-Rating
50C
Connector
PH 2.0
Case Type
Hard case
Dimensions
137x46x24mm
Battery Cell Type
LiPo
Wire Exit
Side
Weight
259g
Source
Ovonic Specs
Notes
The Ovonic 5200mAh 2S 50C LiPo battery is a high-performance, 7. 4V hardcase battery designed for 1/10 and 1/8 scale RC cars, trucks, and boats.
Verify connector and wire exit in photos.
Gens Ace
Capacity
450mAh
Voltage
2S
C-Rating
50C
Connector
JST
Case Type
Soft case
Dimensions
56x31x11mm
Battery Cell Type
LiPo
Wire Exit
Side
Series
Standard Series
Weight
33g
Source
Gen Ace
Notes
The Gens Ace 450mAh 2S 50C LiPo battery (7. 4V) is a lightweight power source designed for small RC models like the Emax Babyhawk and 250-sized helicopters.
Verify connector and wire exit in photos.
Platform: Rock Crawler
Notes: The Everest Ascent Rock Crawler combines extensive research and cutting-edge engineering for exceptional out-of-the-box performance.
We compare tray dimensions against verified battery dimensions, applying a 2mm tolerance for cable management and straps.
Spacer Required: The battery is notably shorter than the tray, so a foam block helps prevent movement.
Voltage mismatch: The battery’s max charged voltage exceeds the car’s rated limit.
Hard case required: Some tracks require hard-case packs for safety and compliance.
Low voltage alarm recommended: The chassis may not be LiPo-ready, so extra protection is recommended.
Adapter needed: The connector type differs, so a rated adapter or re-solder is required.
We group compatible connectors, surface “fits with mod” only when an expansion-height path exists, and still recommend verifying wire exit clearance in photos.
Open the car page
Review chassis notes, specs, and selected compatible packs.
Browse more cars
Jump to similar chassis, trims, and other tray sizes.
Open setup guides
Read the measurement, safety, and connector primers before buying.
Measure your tray again
Useful if you suspect your trim or battery straps differ from the catalog.
